Chris Alston's Chassisworks Brands Chassisworks VariShock KP Components Total Control Products
 
  | Steering | Front Suspension | Rear Suspension | Chassis | Engine/Trans | Billet | VariShocks | Drivetrain | Brakes |  
  | New Parts | Applications | Catalog | Support | System Guides | Order Online | Order Phone: (888) 388-0298  

Showroom is currently open limited hours. Please call ahead prior to visiting.
New Products  

NEW! - Mini-Tub Leaf Spring Suspension

Substantially greater clearance for extremely large tire and wheel combinations. Relocated shocks and springs combined with the additional mini-tub clearance allow 2-3/4” more tire clearance on each side of the vehicle.

  • Fits 1964-1970 Mustangs
Mini-Tub g-Link Rear Suspension

NEW! - Mini-Tub g-Link Suspension

The Mini-Tub g-Link further broadens the performance application range of our g-Link suspension series to include modern pro-touring builds with substantially larger tire and wheel sizes.

  • Fits 1964-1970 Mustangs
  • Adds 2-3/4" clearance per side
  • Stronger than OEM frame rails
Mini-Tub g-Link Rear Suspension

NEW! - Weld-In Frame Clip System

Total Control Products front subframe clip is a direct-fit, high-performance suspension solution designed for 1964-1970 Mustangs and Cougars, featuring a factory-welded subframe with g-Machine double A-arm, rack-and-pinion crossmember.

  • Fits Coyote, LS, and Ford V8s
  • Stronger than OEM frame rails
  • Five different suspension options
TCP Front Frame Clip System

Billet Vent Canister

Billet-Aluminum Vent Canister

Our top-quality, billet-aluminum vent canister system for gas tanks, rear ends and transmissions features a selection of mounting bracket and hoses kit options for greater installation flexibility.


Rack and Pinion Steering Systems

'71-73 Mustang/Cougar Rack and Pinion Kits

Our patented line of high performance center-take-off rack and pinions enables correct geometry and a level of positive, direct steering that is not possible with adapted OEM units.


Adjustable Motor Mounts

Adjustable Motor Mounts

Whether working out exhaust or transmission clearance issues, or altering the engine position for improved weight distribution on your Mustang, Cougar or Falcon, a new set of adjustable small-block motor mounts from Total Control Products may be just what you’re looking for.


Custom-Fit Transmission Crossmember

Custom-Fit Transmission Crossmember

Whether altering drivetrain position or swapping in a non-factory transmission, the weld-in transmission crossmember kit is the correct part for the job.


Late-Model Transmission Adapter

Late-Model Transmission Adapter

Converts 2005-up Ford Mustang transmssion mount to common two-bolt pattern.


Shock Tower Deletes

Shock Tower Delete Panels

Make more room in your engine bay with TCP's shock tower delete panels. Panels are made from sturdy 14-gauge steel and come pre-drilled to save considerable time during installation.


Builder Wheel Tubs

Builder Wheel Tubs

The professional solution for street or race car use, assembled tubs measure 21” wide with 34” diameter. End caps feature a 1”-radius corner with offset lip for easy assembly and flush outer surface alignment.


Bolt-On Front Coil-Over

Bolt-On Front Coil-Over

The new bolt-on coil-over is cost-effective suspension solution that enables suspension tuning and uses OEM or aftermarket control arms. Also avaialble in air-suspension version.


gStreet Anti-Roll Bar and Shock Packages

gStreet Anti-Roll Bar and Shock Packages

A selection of direct-replacement front and rear suspension upgrade packages; includes front and rear anti-roll bars matched with VariShock Bolt-Ins.


Panhard Bar System

Panhard Bar System

A perfect compliment to your leaf-spring suspension, the TCP Panhard Bar System incorporates adjustable roll center geometry and sliding-link anti-roll bar adding suspension tuning features and greatly improved handling performance.


g-Bar Canted-4-Bar Rear Suspension

g-Bar Canted-4-Bar Suspension System

The g-Bar and g-Link bolt-in, canted-4-bar suspension systems directly replace the OEM leaf springs and shocks for remarkably improved handling and performance.

NOW AVAILABLE FOR '71-73 MUSTANGS


Leaf Spring Suspension Systems

Leaf Spring Suspension Systems

A selection of performance suspensions ranging from improved stock-style components to track-ready torque arm and panhard bar enhanced systems.

   

 

The following California proposition 65 warning applies to all Total Control products sold by Chassisworks.

WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

 

NEW Product Catalog

 

Rack and Pinion Systems

 

VariShock Bolt-Ins

 

Like us on Facebook!

Like us on Facebook for inside info, shared photos, exclusive offers and more!

TCP-Racing Updates


TCP-Racing Updates

TCP-Racing Archive

 

Site Updates
Site Updates Archive

 

Eleanor Information


Eleanor - 1967 GT500As a service to our customers and Eleanor fans we will keep our Eleanor information pages available.

Eleanor Information

Home | Products | Support | Features | Contact | Site Map | Terms | Privacy | Press

© 2018 Total Control Products - A Chris Alston's Chassisworks, Inc. Brand

Toll Free: 888.388.0298